求各位大侠帮忙翻译下英文合同

[求一篇正式的英文婚礼邀请函范文急！]您好，看到您的问题将要被新提的问题从问题列表中挤出，问题无人回答过期后会被扣分并且悬赏分也将被没收！所以我给你提几条建议：一，您可以选择在正确的分类下去提问或者到与您问...+阅读

The heat exchangers (cooler) in the units shall be designed such that they are easily to access and to clean, if possible. To facilitate cleaning, all revision openings at the unit shall be arranged at the same side. Particular attention shall be paid for the cooler that a condensate collection trough of stainless steel has been installed and mounted at a slope of at least 1°across the whole width of the cooler. A sufficiently dimensioned water drain shall be provided at the lowest point where condensate can flow off via a siphon. In the utility shafts provided for ventilation, the ventilation pipelines (risers) are separated from each other by a fire protection wall (brickwork) to be prepared by the building contractor. 整体厨房配件的换热器（散热器）的设计应尽可能让人容易接近和清理。

为了方便清洗，所以检修通口应安排在相同的管道一侧。特别要注意安装一条收集冷凝水的不锈钢水槽，以最少1°的斜度沿着整个散热器的宽度横跨固定。在水槽的最低处应有一个大小适度的泄水沟，通过虹吸管将冷凝水排走。在用于换气的公用竖井内，所有的换气管（立管）必须以防火墙（砖墙）个别分开，防火墙由建筑承包商负责准备。

Room air engineering systems for kitchens shall be operated only by outside air. Recirculation mode of operation is not allowed. The balance of all air flows (fresh air and exhaust air) in the whole kitchen area shall be balanced. The supply air is fed into the canteen area and flows into the kitchen where it is extracted via hoods. Air flowing in from hygienically objectionable rooms shall be excluded. 厨房内空气工程系统的操作只能利用室外空气，不允许使用室内空气循环模式。

整个厨房范围的空气流量（新风和排风）应该保持平衡。输入食堂的新风流进厨房，然后通过排气罩抽出。来自不卫生房间的空气不应被输入。Sealing elements and flexible connections in the exhaust air area shall be grease-, acid and lye resistant. All surfaces shall be abrasion-resistant, smooth, water-proof and easy-to-clean. Normally, galvanized steel sheet or chromium nickel steel are used for the exhaust and waster air pipelines. Horizontal air pipelines shall be provided with double folds at the sides or top sides. Folds at the underside shall be avoided. The joint with connection flanges shall be screwed at short distances and provided with grease, acid and lye resistant gaskets. 排风区的密封构件和柔性接口处必须耐油脂及耐酸碱。

所有表面材质应当是耐磨、光滑、防水、且易清洗。排气和废气管道通常是用镀锌或铬镍钢板制成。横置通风管道的上部与侧部应该提供双褶皱，但管道底部应避免褶皱。法兰对接的接口应配以耐油脂及耐酸碱的衬垫，然后密集地以螺丝拧紧。Revision openings shall be provided in the air pipeline at branches, changes of cross-sections and bends as well as at the place of installation of particular pipeline components for cleaning. For straight air pipeline, openings shall be provided approx. every 3 m. The openings shall be provided with covers the tightness and resistance of which shall be comparable with those of the flanged connections. In addition, the pipelines shall be designed as straight as possible and reversing sections shall be minimized.在通风管的分支部位、根管横截面改变及弯曲部，以及安装特定清洗管道部件的位置，都应设有检修通口。

这些通口都应有封盖，其密封度与防腐蚀度都应与法兰对接的接口类似。另外，管道应该尽可能的为直线，而换向的部位应尽可能减少。【英语牛人团】