化学化工专业英语翻译求高手

[求高手俄文翻译中文]在开始时，环顾四周，爬上更高，不提前攀升，评估的情况，在哪里，什么时候需要？不要急于在第一个可用的目标。 A.，这里有两个我们追逐一头毛驴！ Seychaaas ...如果你不能做没有“狗转储”，...+阅读

化学化工专业英语翻译求高手

大概是：

石油产品应用每一个人的石油工业产品，无论是一个单一的加工设备或由几个不同的工序生产的部件混合输出，必须由客户来执行定义的函数，例如：作为燃料，润滑剂，粘合剂，建筑材料，防水剂，防腐蚀，电气绝缘材料等为了履行好服务，每个产品需要，可以定量地描述某些特征。对于examply，它可能需要有足够的液体零下-10℃之间，并加上35℃为泵送。这一特点，然后要为一个或多个测试measurements.In这examply在定义温度的粘度上限可能确保流动性在翻译寒冷的环境，以及蒸汽压力测量可能确保流入不会停止通过在高工作温度vapout锁。阿的所有应用程序的技术要求的结合上提供了燃料可以描述或标准测试方法上指定的基础。

化学专业英语翻译有请高人帮忙

ε is not thermodynamically advantageous to form the larger aggregations because of the increased disorder, such as the CMT.事实上，只要实验和模拟中的温度关系被正确构建， that the higher temperature than 0PDMAEMA71-b-PAA59 diblock polyampholyte was afforded by one-pot ATRP and the followed acidic hydrolysis. The critical micellization temperature (CMT) of this polyampholyte in basic medium (pH = 11) was determined as 37，对形成更大尺度的聚合物在热力学上是不利的。In a word, both experimental and simulating results confirmed the temperature-induced micellization of PDMAEMA-b-PAA polyampholyte, in fact, will become much more meaningful, because the simulation results will provide a more certain guidance for designing the polyampholyte with specific structure;C by turbidity measurements and 37-39 º，计算机模拟结果将有意义得多，温度超过0。

When ascending temperature, turbidity measurements confirmed the change of PDMAEMA71-b-PAA59 basic aqueous solution from transparent to milky, whereas, the association of temperature in experiments and simulations calls for further efforts to be made.总之，实验和模拟都证实了PDMAEMA-b-PAA 聚两性电解质胶束化过程的温度诱导效应，随后进行酸水解合成，临界胶束化温度（CMT）以浊度法和DLS法测量结果分别是37.5º. 然而值得注意的是，结果表明：当温度从0.1κT/ε升高到0.6κT/ε，聚两性电解质经历了一个从单体到胶束再到大尺度聚合物逐步变化的过程.5 ºε时，因无序度增大，PDMAEMA71-b-PAA59碱性水溶液从透明变成乳状液，这表明分子水平溶解的单体逐步变成最终的聚合物， due to the balance between the favorable and unfavorable forces for unimers to gather in a large-scale, and even the tunable parameters from the molecular-level;C;C by DLS characterizations, respectively.二嵌段聚两性电解质PDMAEMA71-b-PAA59 可采用一锅法原子转移自由基聚合（ATRP）。

Based on the primitive model of A70B60, the molecular dynamic simulations at various temperatures showed that polyampholyte experiences a gradual conversion from unimer, to micellization, and until to a large-scale aggregation when the temperature increases from 0.1κT/ε to 0，甚至可以在分子水平上调控过程中的一些参数，例如CMT。如有不明欢迎追问。在碱性介质中（pH=11）。然而，实验和模拟中二者温度关系有待进一步研究。Providing a conjunction between the temperature in experiment and the system temperature in simulation is constructed correctly, computer simulation；ε.6κT/，这种变化起因于单体聚合成大尺度过程中引力和斥力的平衡。It is notable, however.6κT/C和37-39 º， indicating the gradual change from molecularly dissolved unimer to the ultimate aggregation. DLS results showed the continual increase in the volume-average diameter (Dh) of the micelles from less than 15 nm to more than 640 nm. 浊度测量证明，随着温度升高.6κT/. 依据A70B60为原始模型，在不同温度下以分子动力学模拟。

DLS测试结果则表明胶束的体积平均直径（Dh）由小于15nm连续变化为超过640nm，这是由于模拟结果将为特定结构的聚两性电解质的设计提供更为明确的指导

应用化学专业英语翻译

全手工，如下，请过目： The characterization of a material may go beyond chemical analysis to include structural determination of materials,the measurement of physical properties of a material,and the measurement of physical chemistry parameters like reaction kinetics. 对物质特性描述的范围可能超出化学分析的范围。物质特性描述包括确定材料结构、测定材料物理属性及反应动力等物化参数。 Examples of such measurement are the degree to which a polymer is crystalline as opposed to amorphous,the temperature at which a material loses its water of hydration,how long it takes for antacid“Brand A”to neutralize stomach acid and how fast a pesticide degrades in sunlight. 这些测定包括：找出确定某种聚合物属于晶体还是非晶体的标准、测量某种材料失去结合水时的温度、＂Brand A＂（最好的）抗酸剂中和胃酸所需时间以及杀虫剂在阳光下降解的速度等。